Bushes
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
£22.74 per bush. Sold as a pack of 2
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
£22.74 per bush. Sold as a pack of 2
Made from our Black 95A Durometer Polyurethane with a CNC-machined stainless steel offset sleeve, this bush adds stiffness and durability improving stability and wheel control during cornering, and allows for +/-0.5° of Camber adjustment for dialling in your wheel geometry.
£58.14 per bush. Sold as a pack of 2
Made from our Black 95A Durometer Polyurethane, this bush adds stiffness and durability improving stability and wheel control during cornering.
£37.74 per bush. Sold as pack of 2
Using a steel outer shell and a Black 95A Durometer bush with a tapered bore, this bush reduces fore and aft movement of the wheel under acceleration and braking and reduces dynamic castor change during cornering, whilst allowing free articulation of the suspension arm.
£54.54 per bush. Sold as a set of 2
Designed around our unique on-car adjustable Nylon/Polyurethane ball-joint combination for more direct steering input and improved cornering and braking. The offset bore allows for +/- 0.75° of caster adjustment with a supplied spanner to assist the fine-tuning of the car’s wheel geometry. Optional washers are included to add anti-lift geometry, improving front wheel grip under acceleration.
£89.34 per bush. Sold as a pack of 2
To replace the small rubber bushes at the end of the gear linkages, these bushes are made from our Purple 80A Durometer polyurethane to give a stiff and precise gear-change.
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
£22.14 per bush. Sold as a pack of 2
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
£22.14 per bush. Sold as a pack of 2
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes.
£28.14 per bush. Sold as a pack of 2
Using a composite design with stainless steel, Black 95A and Purple 80A Durometer polyurethane; this bush improves stiffness and durability over the factory rubber bush for sharper turn-in and more precise rear axle control.
£68.34 per bush. Sold as a pack of 2
A drop-in replacement for the soft rubber factory spring pads, these pads are made from our Purple 80A durometer material to ensure stability and direct steering feel from the rear axle.
£32.28 per bush. Sold as a pack of 2
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
£22.74 per bush. Sold as a pack of 2
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
£22.74 per bush. Sold as a pack of 2
Made from our Black 95A Durometer Polyurethane with a CNC-machined stainless steel offset sleeve, this bush adds stiffness and durability improving stability and wheel control during cornering, and allows for +/-0.5° of Camber adjustment for dialling in your wheel geometry.
£58.14 per bush. Sold as a pack of 2
Made from our Black 95A Durometer Polyurethane, this bush adds stiffness and durability improving stability and wheel control during cornering.
£37.74 per bush. Sold as pack of 2
Using a steel outer shell and a Black 95A Durometer bush with a tapered bore, this bush reduces fore and aft movement of the wheel under acceleration and braking and reduces dynamic castor change during cornering, whilst allowing free articulation of the suspension arm.
£54.54 per bush. Sold as a set of 2
Designed around our unique on-car adjustable Nylon/Polyurethane ball-joint combination for more direct steering input and improved cornering and braking. The offset bore allows for +/- 0.75° of caster adjustment with a supplied spanner to assist the fine-tuning of the car’s wheel geometry. Optional washers are included to add anti-lift geometry, improving front wheel grip under acceleration.
£89.34 per bush. Sold as a pack of 2
To replace the small rubber bushes at the end of the gear linkages, these bushes are made from our Purple 80A Durometer polyurethane to give a stiff and precise gear-change.
Included within this pack are the following parts:
PFF26-101 Front Wishbone Front bush
PFF26-102 Front Wishbone Rear Bush
PFF26-120 Lower Torque Mount Bush
PFR26-115 Rear Trailing Arm Bush
PF26-160 Jack Pad Adpator
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
£22.14 per bush. Sold as a pack of 2
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
£22.14 per bush. Sold as a pack of 2
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes.
£28.14 per bush. Sold as a pack of 2
Using a steel outer shell and our Black 95A Durometer polyurethane, this bush ensures long-lasting performance and control over toe geometry of the rear wheels. Includes steel fitting tools to support the pressed-steel arm during bush fitting. Does not fit the welded tubular arm fitted to fastback models.
£49.74 per bush. Sold as a pack of 4
Using a steel outer shell and our Black 95A Durometer polyurethane, this bush ensures long-lasting performance and control over rear wheel geometry. Includes steel fitting tools to support the pressed-steel arm during bush fitting.
£59.94 per bush. Sold as a pack of 2
Using a composite design with stainless steel, Black 95A and Purple 80A Durometer polyurethane; this bush improves stiffness and durability over the factory rubber bush for sharper turn-in and more precise rear axle control.
£68.34 per bush. Sold as a pack of 2
A drop-in replacement for the soft rubber factory spring pads, these pads are made from our Purple 80A durometer material to ensure stability and direct steering feel from the rear axle.
£29.34 per bush. Sold as a pack of 2
Using a steel outer shell and our Black 95A Durometer polyurethane, this bush ensures long-lasting performance and control over rear wheel geometry. Includes steel fitting tools to support the pressed-steel arm during bush fitting.
£46.14 per bush. Sold as a pack of 4
Using a steel outer shell, our Black 95A Durometer polyurethane and a CNC machined stainless offset sleeve, this bush ensures long-lasting performance and control over rear wheel geometry. Each offset sleeve allows for +/-0.75° camber change on the rear wheels for dialing in your wheel geometry. Includes steel fitting tools to support the pressed-steel arm during bush fitting.
£53.34 per bush. Sold as a pack of 4
